Video monitoring data wireless transmission solution

network video monitoring system as part of the safety management system, in areas such as parks, scenic spots, campus, community policing is gaining more and more widely used. And parks, scenic spots, the campus, residential area and other areas, generally there is a large area scattered, video monitoring equipment, etc. Using traditional wired network, problems wiring trouble, construction cost is higher, so the way tend to adopt wireless remote transmission monitoring data, save the trouble of wiring, reduce the construction cost in the network deployment, the deployment of network video monitoring equipment is more convenient.

demand analysis

1, meet the demand of the wireless remote data transmission, to ensure that the high signal intensity

2 more scattered, video monitoring equipment, to meet the large demand of multiple video monitoring equipment at the same time access to

3, use of equipment to meet bad outdoor environment, and satisfy a certain level of lightning protection, waterproof and dustproof

4, CPE should support PoE power supply, convenient access to the outdoor environment power and meet the demand of flexible points

5, CPE support, unified management, configuration, and real-time monitoring of the CPE working status, easy operations

design installation schematic

scheme characteristic

scheme using outdoor wireless remote wireless monitoring data transmission on the CPE, the Pharos Control centralized management software unified management of all the CPE ways for deployment. Has the following characteristics:

high adaptability

CPE professional outdoor shell design, provide IP55 class dustproof, waterproof, support 15 kv ESD electrostatic protection and 4 kv lightning protection, adapt to all kinds of bad environment.

high availability

300 m wireless transmission rate, built-in high-gain outdoor dual polarization antenna, external high-performance independent power amplifier circuit ( PA） And the low noise amplifier receiving circuit ( LNA） To provide 27 DBM ( 500mW) The transmitted power and - Accept the sensitivity of 95 DBM, especially suitable for outdoor remote WLAN application.

buzzer-beaters transmission distance

CM530 - 81 specially designed for outdoor, wireless transmission distance of more than 5 km; CM530 - 81 work in pure 5 GHZ frequencies, less interference, wireless transmission distance of more than 15 km.

high reliability

CPE support technology, can solve the standard IEEE 802. 11 the hidden nodes problem of the agreement, reduce resource waste caused by client competition mechanism, provide lower latency and higher throughput, greater network capacity and stability, improve the multi-node wireless network performance.

easy deployment

CPE using Passive PoE cable power supply, 60 meters power transmission, convenient outdoor environment while plugged into a power supply, flexible points. CPE LAN1 port has PoE power supply function, can transmit data at the same time for the electrical equipment and power supply, flexible deployment of PoE by electric equipment.

a feature-rich

Pharos WEB management system to provide the rich software functions, provide the AP, AP Client, Bridge, Repeater, AP Client Router and AP Router and so on the many kinds of working mode, support functions of linear adjustment of transmitted power and spectrum analysis. Can view the system resource state, the wireless signal quality, radio frequency (rf) state, throughput, wireless client system working parameters, such as real-time control equipment working condition.

manageability

by Pharos Control centralized management software to manage all outdoor wireless base stations and CPE series products, to provide device discovery, working status monitoring, unified firmware upgrade, timing, task, abundant management functions such as email alerts, reduce the large-scale deployment of the management of the maintenance workload.