The PLC and the computer technology and relay - Contactor control technology of the relationship and the characteristics of the widely used

With semiconductor technology, especially the development of the microprocessor and microcomputer technology, by the mid 70 s, especially into the 80 s, the PLC has been widely using 16-bit or 32-bit microprocessor as the CPU, input and output module and peripheral circuit are adopted, mass, and even in very large scale integrated circuit, PLC controller in concept, design, cost performance and application has the new breakthrough. At this time of the PLC is not only a logic function, also have the function of data processing, PID control and data communication, called the programmable controller ( 可编程序控制器) More appropriate, referred to as the PC, but personal computers (in order to Persona1电脑) Hereinafter referred to as distinguished from the PC, generally will it PLC (for short 可编程逻辑控制器) 。 PLC is the microcomputer technology with the traditional relay - The combination of the contactor control technology, the basic design idea is to put the computer function is perfect, and the advantages of flexible, general and relay control system of simple, easy to operate, combine the advantages of cheap, the hardware of the controller is a standard, generic. According to the actual application objects, the control content into software into the controller of the user program memory. Relay control system for hundreds of years of history, it is the weak current signal control system control method, the complex of relay control system, the failure to find and rule out difficult, time is long, seriously affect the industrial production. In the case of process requirement change, control components and wiring needs to be contained in the corresponding change, modification, long period, high cost, so that users would rather also produced a new cabinet. Overcomes relay and PLC Contactor control system of mechanical contact wiring complex, high reliability, low power consumption, the poor generality and flexibility, make full use of the advantages of the microprocessor, and the link controller and the controlled object is convenient. Since the PLC is composed of microprocessor, memory and peripheral devices, so should belong to the category of industrial control computer. For users, programmable controller is a non-contact equipment, the change process can change the production process, so if use programmable controller in preliminary design stage, can make it simple easy to find the design and debugging. From the point of view, the production of the programmable controller manufacturers in the manufacturing stage don't need a specially designed controller according to the user's orders, is suitable for mass production. Due to these characteristics, the advent of programmable controller soon was welcomed by the industry control, and to get rapid development. At present, the programmable controller has become a powerful tool for factory automation, has been widely used.
Coolmay is the unique producer of plc manufacturers and related products.
With comprehensive knowledge on plc manufacturers,why not visit the highly recommended site Coolmay PLC to get a full appreciation of the best ?
plc manufacturers can be great additions to companies looking to improve the well-being of their employees, as well as increase the efficiency and productivity of their workers across the organization.