PLC is sent through the control pulse to control the servo motor -

speed control are generally have a frequency converter to realize, do with servo motor speed control, is generally used in rapid deceleration speed or precise control of the situation, because relative to the frequency converter, servo motor can turn within a few millimeters to a few thousand, due to the servo is a closed loop, the speed is very stable. Torque control is mainly to control the servo motor output torque, also because the response of the servo motor. Application of the above two kinds of control, can put the servo drive as a frequency converter, are generally use analog control.

the main application of servo motor position control, position control, there are two physical quantities need to control, the speed and position, specifically, is to control the servo motor in what place, at the speed of how fast and accurate to stop.

the number of pulse frequency and servo driver by receiving to control the distance and speed of the servo motor running. For example, we agreed per 10000 pulses a servo motor. If PLC send 10000 pulses in one minute, then servo motor at a rate of 1 r/min through a circle, if send 10000 pulses in a second, then servo motor through at a speed of 60 r/min.

so, PLC is sent through the control pulse to control the servo motor, send pulse in physical way, also is to use PLC output transistor is the most commonly used way, generally is the low end of the PLC in this way. And in high-end PLC controller is through the way of communication to the number and frequency of the pulse is transmitted to the servo drive, such as the Profibus - DP CANopen, MECHATROLINK - II, EtherCAT and so on. These two approaches is different channels, essence is the same, for our programming, is the same. This is I want to say with you, to learn principle, instance, rather than to learn and learn.

for programming, the difference is very big, is Japanese PLC controller with the method of instruction, and European series PLC controller is in the form of function block. But the essence is the same, such as an absolute positioning servo control go, we need to control the output of the PLC channel, pulse number and pulse frequency, deceleration time, and need to know when positioning servo driver is accomplished, if encounter limit and so on. , no matter what kind of PLC is to control these quantities and movement parameters can be read, just different is not the same as the realization method of PLC.

the article source: transport control servo

disclaimer: in this paper, system network reproduced, all peer originator. This paper used video, pictures, words such as works copyright issues involved, please inform me the first time, we will according to you to provide evidence to confirm the copyright and pay the remuneration according to the national standards or delete the contents immediately! The article content for the original author point of view, does not represent the public agree with their views and responsibility for their authenticity.

To that end, Shenzhen Coolmay Technology Co., Ltd. has successfully built a solid foundation and infrastructure for plc manufacturers manufacturing.
Shenzhen Coolmay Technology Co., Ltd. strives to be the acknowledged global leader and preferred partner in helping our clients succeed in the world’s rapidly evolving financial markets.
The global market is estimated to reach a value of almost programmable control systems in the next decade. have a robust position in the plc controller price market because of its proven high potency in programmable control systems.
plc controller price plc manufacturers with programmable control systems are used extensively in plc controller price.