In mechanical and electrical products in the application of slotting machine

Abstract: this article mainly introduces the slot machine system configuration. Servo DOP a: key words: programmable controller system configuration 28 sv11t + 16 sp11t + DOP10AE + 3 * ASD in SV model because of its support for three axis high-speed pulse output at the same time. Two: the process shows that this system is divided into three kinds of I/O distribution operation, manual/single action/automatic. Try manual is to adjust the time. Work with a single action and automatic two operation modes. Single action and automatic single action is the difference between a trough, automatic multiple slots ( According to the requirements of the slotted) , single action and automatic independent formula of the group of 20, sv model with EH model has broad power to keep the area, so all the formula to do inside the PLC controller. Adjust the gear ratio makes three axis normal movement speed for PLC controller output pulse is more than 100 k. Three axis respectively responsible for z, up and down before and after the x, y, around the shaft regression for quick, to the slot starting position for quick movement at the same time. Work process ( Automatic) : machining parts: steel plate set formula - - - - - - - - - - - - - - Three axis to return to the origin - - - - Point automatically - - - - Three axis to the starting slot position - - - - - Open the first channel slot, according to the set - end of the first plane the number of channel slot need - - - The second channel slot - open - - - - To the slot number finish - set - - - X axis back to the origin position, the other two axis - back to the starting slot position - - - - - - - - The second piece of steel plate on it - — Slot in the process of air valve and hydraulic valve frequent movement, to scrap iron and pull up the steel plate. Each state of the process of slotting are displayed on the touch screen. Three axis movement has strict order, length, width and depth are protected, otherwise may make damage of the cutting tools, steel plate is damaged, servo alarm. Three: conclusion this slot machine SV model of three axis movement of a typical case. With SV ratio of believe in three-axis servo to more and more widely used.
If you are looking for an effective and safe way to take care of plc controller price, then plc manufacturers programmable control systems are the best bet.
Always do our research, follow the rules and plans ahead for additional expenses. Expanding is the goal of Shenzhen Coolmay Technology Co., Ltd. ; expanding properly is the goal of the wise business.
The manufacturing industry is changing fast, so, for Shenzhen Coolmay Technology Co., Ltd. , being able to pivot and adapt as the marketplace shifts is imperative.
Unlike the plc controller price, the is more flexibly used in accasions where programmable control systems .
Though the cost of these sustainability initiatives as plc manufacturers can be high, harnessing the power of an ethical supply chain to appeal to conscientious consumers can be a smart move both ethically and financially.