Detailed, unscramble RX3i power module

RX3i input voltage of the power supply module can have 100 ~ 240 vac, 125 VDC, 12 VDC or 24 VDC alternative, etc. RX3i power supply module model and performance parameters are shown in table 1 3. In the power supply module, besides IC695PSD040 module requires a slot, the rest of the power supply module are take up two slots. Universal power module ( IC695) Installed on the general back, in addition to the highest number ( Most the right side) Slot, the extension of the power supply module ( IC694） Must be installed on the extended back the power slot on the left.

IC695PSD040 power supply module and the appearance of IC695PSA040 as shown in the figure below.

IC695PSD040 appearance figure

IC695PSA040 appearance figure

IC695PSD040 power supply module, for example, the module of the input voltage range is 18 to 39 VDC, the output voltage 24 VDC, provide 40 w output power. The four LEDs on the power supply module function description is as follows: 1.

力量- - - - - - Power supply ( Green/yellow amber) 。 When the LED is green, means that the power supply module in the feed back. When the LED is amber yellow, means that the power supply has been added to the power supply module, but the switch on the power supply module is closed.

2。 P / S——错 Failure ( Red) 。 When the LED lights up, means that the power supply module have fault and can not provide enough voltage to back.

3。 OVERTEMP - Temperature is too high, Amber yellow) 。 When the LED lights up, means the power supply module near or more than the highest working temperature.

4。 Overload ( Amber yellow) 。 When the LED lights up, means that the power supply module has at least one output is close to or exceed the maximum output power.

if the p/S FAULT LED red light, and power supply module failure can't give back to provide enough voltage; Amber yellow OVERTEMP and OVERLOAD LED lit, mean temperature is too high or high load conditions. Any temperature is exorbitant, overload or P/S errors, PLC controller fault table will show the fault information.

this module ON/OFF switch is located in the module behind the front door, to control the output of the power supply module. It should not cut off the input power of the module. Close to the switch to highlight part to help prevent accidental switch on and off.

+ 24 v and - 24 v power supply, grounding, and MOV terminal hole can be 14 to 22 AWG wires.

RX3i type and performance parameters of the power supply module

The plc manufacturers approach to plc controller price is becoming increasingly popular; consequently, there is a surge in the demand for .
Shenzhen Coolmay Technology Co., Ltd. offers best-in-class products, fast delivery time, and personable, highly competent, and unparalleled services.
Shenzhen Coolmay Technology Co., Ltd. , which contributes itself on plc manufacturers for creating more useful application.
To find a qualified at reasonable price, contact Shenzhen Coolmay Technology Co., Ltd. at Coolmay PLC, a professional provider and tell them what you envision for your plc manufacturers.